TRIUMPH TR6
PLATE DY
DELCO REMY ALTERNATORS
9
DELCO REMY ALTERNATORS
Please Note:
Delco Remy alternators were fitted as alternatives
to Lucas-brand alternators to an unknown number of TR6
models prior to 1973. Although a complete catalogue listing is
provided in this section for the information of interested
enthusiasts, no new or rebuilt Delco Remy alternators are
available at the time of writing, and parts are difficult to find for
repairs. For all except those who wish to keep their Delco
Remy alternators for originality's sake, we recommend fitting a
Lucas model 17ACR alternator as listed in Section EA.
ALTERNATOR,
Delco Remy brand, Delcotron model DN460,
1
part models as an alternative to Lucas-brand alternators,
fitted up to comm. no. CF1
ALTERNATOR,
factory rebuilt unit, for the application
1
described in the previous listing
ALTERNATOR,
Delco Remy brand, Delcotron model DN460,
1
part no. 7982648; negative ground, 12 volts, 35 amps ,
fitted to non-U.S. models as an alternative to Lucas-brand
alternators, up to comm. no. CR1
ALTERNATOR,
factory rebuilt unit, for the application
1
described in the previous listing
520281
Frame,
drive end
1
Bearing,
drive end
1
Plate,
retaining bearing
1
520282
Screw,
securing retaining plate to frame
3
Collar,
alternator shaft, inner
1
Collar,
alternator shaft, outer
1
Slinger,
grease
1
Rotor Assembly,
1
Frame,
slip-ring end
1
Bearing,
slip-ring end
1
Seal Assembly
1
Bush
1
Rectifier
Bridge and Insulator Assembly
1
HARDWARE,
securing rectifier bridge assembly to
frame; `'live'' side of rectifier bridge
Screw
1
Washer,
plain
1
Washer,
fibre, insulating
1
Insulation Bush,
plastic
NSS
HARDWARE,
securing rectifier bridge assembly to
frame; `'earth'' side of rectifier bridge
Screw
1
Washer,
plain
1
Regulator,
voltage
1
Plate No.
Part No.
Description
No. Off
ALTERNATOR
--Continued
HARDWARE,
securing voltage regulator to frame
Screw,
earthing, red
1
Washer,
plain
1
Brush Box Assembly
1
HARDWARE,
securing brush box assembly and voltage
regulator to frame
Screw
1
Washer,
plain
1
Washer,
fibre, insulating
1
Sleeve,
plastic, on screw
NSS
Brush Assembly
2
Spring,
brush
2
Diode Trio Assembly,
fitted to alternator with Delco
1
part no. 7982652
Diode Trio Assembly,
fitted to alternator with Delco
1
part no. 7982648
HARDWARE,
securing diode trio, brush box, and
1
voltage regulator to frame
Screw
1
Washer,
plain
1
Washer,
fibre, insulating
1
Sleeve,
plastic, on screw
NSS
HARDWARE,
securing diode trio and stator terminals to
studs on rectifier bridge
Washer,
plain
3
Nut,
hex
3
Stator
Assembly
1
Terminal,
stator
3
PULLEY AND FAN,
fitted to alternator with Delco part
1
no. 7982652
Pulley,
alternator drive, 1/2-inch belt groove
1
Fan,
alternator
1
PULLEY AND FAN,
fitted to alternator with Delco part
1
no. 7982648
Pulley,
alternator drive, 3/8-inch belt groove
1
Fan,
alternator
1
Plate No.
Part No.
Description
No. Off
