V2-88
TRIUMPH TR6
PLATE GM
CONVERTIBLE TOP FRAME DETAILS
CONVERTIBLE TOP FRAME DETAILS
SEALING KIT,
convertible top frame
1
SEALING KIT,
header rail, convertible top frame
1
Seal,
rubber, between header rail and windscreen capping
1
CHANNELS,
steel, securing seal to header rail
Channel,
L.H.
1
Channel,
center
1
Channel,
R.H.
1
Rivet,
Imex (Pop rivet), securing channels to
9
header rail
SEALING KIT,
roof sides to tops of door windows
1
Seal,
rubber, roof side, front
2
Seal,
rubber, roof side, rear
2
CHANNELS,
aluminium, securing roof side seals to
roof cantrails
Channel,
front
2
Channel,
rear
2
HARDWARE KIT,
securing channels to roof cantrails
1
Screw,
set
18
Washer,
plain
18
Washer,
shakeproof
18
Nut
18
Strip,
Velcro, sewn, fitted to sides of roof cantrails
1
(Length supplied is sufficient for one top frame.)
REAR MOUNTING STIFFENER DETAILS
Angle,
stiffening, mounting soft top to rear deck
1
HARDWARE KIT,
securing stiffening angle to rear deck
1
Screw,
set
5
Washer,
lock
5
Nut,
rivet
5
HOOD WEBBING KIT
, with hardware
1
Webbing,
hood, supporting convertible top frame
2
HARDWARE,
securing hood webbings to rear stiffening
angle and convertible top frame
Pin,
retaining webbings to slots in rear stiffening angle
2
Plate,
securing webbings to hood stick
8
Rivet,
Imex (Pop rivet), securing plates and
1
webbings to hood stick
16
Plate No.
Part No.
Description
No. Off
LATCHING DETAILS,
convertible top frame to windscreen
Please Note:
The two types of latches show up
intermittently. The only difference is the use of the
UNC screw or the metric screw, and these are
not interchangeable, but the latches are
interchangeable as assemblies.
EARLIER FITMENT
(See note above.)
LATCHING HANDLE ASSEMBLY,
L.H.
1
LATCHING HANDLE ASSEMBLY,
R.H.
1
Handle,
latching
2
Escutcheon
2
Washer,
waved
2
Pin,
latching, drilled and tapped for UNC screw to
2
attach handle
Screw,
UNC, securing handle to pin
2
LATER FITMENT
(See note above.)
LATCHING HANDLE ASSEMBLY,
L.H.
1
LATCHING HANDLE ASSEMBLY,
R.H.
1
Handle,
latching
2
Escutcheon
2
Washer,
waved
2
Pin,
latching, drilled and tapped for metric screw to
2
attach handle
Screw,
metric, securing handle to pin
2
HARDWARE,
securing latching handles to convertible
top frame (to header rail)
Screw,
set
4
Washer,
plain
4
Washer,
shakeproof
4
Nut
4
Buffer,
rubber, on main links
2
HARDWARE,
securing buffers to main links
Rivet
2
Washer,
plain
2
Fabric Strip,
mounted to front, main, and rear hood sticks
3
between webbing strips, presumably for sound deadening
COVER DETAILS,
front and rear cantrails, German models only
Cover,
front cantrail, L.H.
1
Cover,
front cantrail, R.H.
1
Cover,
rear cantrail, L.H.
1
Cover,
rear cantrail, R.H.
1
HARDWARE,
securing covers to cantrails
Screw,
set
8
Washer,
plain
16
Washer,
lock
8
Nut
8
Plate No.
Part No.
Description
No. Off
