TRIUMPH TR6
PLATE FX
WOOD DASH PANELS
67
CHROMED GLOVEBOX
HINGES; FITTED VERY
EARLY IF AT ALL
BLACK GLOVEBOX
HINGES; FITTED UP TO
COMM. NO. CC75000
SLIGHTLY WIDER
HAZARD WARNING
SWITCH; FITTED
DURING 1972
ONE WARNING LAMP
UNDER INSTRUMENT
CLUSTER; LATE 1972
TWO WARNING LAMPS
UNDER INSTRUMENT
CLUSTER; FITTED FROM
COMM. NO. CF1 UP TO
CF35000
THREE WARNING LAMPS
UNDER INSTRUMENT
CLUSTER; FITTED AFTER
COMM. NO. CF35000
WOOD DASH PANELS
Please Note:
The Roadster Factory makes wood dash panels which
are made, in every way possible, to original-equipment specifications..
Our dashes are produced from hand-veneered, high-density plywood
which is a better material than solid wood for automobile dashes. Our
dashes are made on accurate jigs to factory drawings, with original
specification hinges. Even silk-screened switch identifications are
included on our dashes, in the typestyle specified on the factory
drawings, of course!
WOOD DASH PANELS,
U.S.A. models
Wood Dash Panel,
with chromed glovebox hinges; may
1
have been fitted to very early TR6 models
Wood Dash Panel,
with black glovebox hinges; otherwise
1
identical to previous listing, fitted up to comm. no. CC75000
Wood Dash Panel,
with black glovebox hinges and
1
hazard switch aperture measuring 15/16 inch x 1-5/8
inch, fitted from comm. no. CC75000 up to ? (during 1972)
Wood Dash Panel,
with black glovebox hinges and one
1
warning-lamp aperture under instrument cluster for
seat-belt warning lamp, fitted from an unknown comm.
no. in 1972 up to CF1
Wood Dash Panel,
with black glovebox hinges and two warning
1
lamp apertures under instrument cluster for seat-belt
warning lamp and brake-failure warning lamp, fitted
from comm. no. CF1 up to CF35000
Wood Dash Panel,
with black glovebox hinges and three
1
warning-lamp apertures under instrument cluster for
seat-belt warning lamp, brake failure warning lamp,
and EGR warning lamp
WOOD DASH PANELS,
L.H.S. models other than U.S.A.
Wood Dash Panel,
with chromed glovebox hinges, may have
1
been fitted to very early TR6 models; identical to U.S.
specification
Wood Dash Panel,
with black glovebox hinges;
1
otherwise identical to previous listing, fitted up to
comm. no. CP75000; identical to U.S. specification
Wood Dash Panel,
with black glovebox hinges and hazard
1
switch aperture measuring 15/16 inch x 1-5/8 inch,fitted
from comm. no. CP75000 up to CR1; identical to U.S.
specification for early 1972
Wood Dash Panel,
fitted after comm. no. CR1
1
WOOD DASH PANELS,
R.H.S. models
Wood Dash Panel,
with chromed glovebox hinges; may
1
have been fitted to very early TR6 models
Wood Dash Panel,
with black glovebox hinges and
1
separate rocker switches for windscreen wipers and washer
Wood Dash Panel,
with black glovebox hinges and
1
single combined switch for windscreen wipers and washer
Plate No.
Part No.
Description
No. Off
HARDWARE,
included with wood dash panels
Please Note:
Hinges are installed on all dash panels.
HINGE KIT,
glove box door, chromed hinges with
1
mounting screws
Hinge,
glove box door, chromed
2
Screw,
longer, securing hinges to glove box door
6
Screw,
shorter, securing hinges to wood dash panel
6
HINGE KIT,
glove box door, black hinges with mounting
1
screws
Hinge,
glove box door, black
2
Screw,
longer, securing hinges to glove box door
6
Screw,
shorter, securing hinges to wood dash panel
6
HARDWARE,
not included with wood dash panels
Please Note:
Glove box locks, striker plates, and other
fittings are listed in Section FW.
Plate,
retaining windscreen wiper and washer switches,
1
fitted up to comm. no. CF1/CR1
Screw,
securing retaining plate to back of wood dash panel
3
Plate,
retaining lighting switch, fitted after comm.
1
no. CF/CR1
Screw,
securing retaining plate to back of wood dash
2
panel
Bracket,
mounting panel lamp rheostat switch, fitted up
1
to comm. no. CF/CR1
Bracket,
mounting panel lamp rheostat switch, fitted
1
after comm. no. CF/CR1
Screw,
securing rheostat-switch mounting bracket to
2
back of wood dash panel
Bracket,
mounting hazard lamp switch, L.H.S. models
1
only, fitted up to comm. no. CC/CP75000
Bracket,
mounting hazard lamp switch, L.H.S. models
1
only, fitted from comm. no. CC/CP75000 up to CF/CR1
Screw,
securing hazard switch bracket to back of
2
wood dash panel
INFORMATION PLAQUES,
mounted to insides of glovebox doors,
possibly fitted to U.S.A. models only
Plaque,
tire pressures, fitted up to comm. no. CC50000
1
Plaque,
tire pressures, fitted after comm. no. CC50000
1
HARDWARE,
securing wood dash panel to steel backing panel
HARDWARE KIT,
chromed screws and cup washers;
1
possibly fitted to some very early TR6 models
Screw,
chromed
5
Washer,
cup
5
HARDWARE KIT,
black screws and cup washers; fitted
1
to most TR6 models
Screw,
black
5
Washer,
cup
5
Plate No.
Part No.
Description
No. Off
