V2-66
TRIUMPH TR6
PLATE FW
DASH AND DASH CRASH PADS
DASH AND DASH CRASH PADS
Plate No.
Part No.
Description
No. Off
CRASH PAD DETAILS
--Continued
HARDWARE,
securing switch plinth to metal dash
panel
Screw,
set, securing plinth reinforcement bracket
1
to metal dash panel
Washer,
lock, securing set screw
1
Screw,
chromed, self-tapping
2
Nut,
spire
2
WOOD DASH PANELS
--See Section FX
HARDWARE KIT,
mounting wood dash, chromed
1
screws and cup washers; may have been used on
very early TR6 models
Screw,
self-tapping, chromed
5
Washer,
cup, chromed
5
HARDWARE KIT,
mounting wood dash, black
1
screws and cup washers; used on all TR6 models
except possibly very early ones
Screw,
self-tapping, black finish
5
Washer,
cup, black finish
5
GLOVE BOX DETAILS
Glove Box Assembly,
fibreboard, L.H.S.
1
Glove Box Assembly,
unbreakable plastic, L.H.S.
1
Glove Box Assembly,
fibreboard, R.H.S.
1
Glove Box Assembly,
unbreakable plastic, R.H.S.
1
Retainer,
glove box interior lamp
1
Rivet,
securing retainer to glove box
3
HARDWARE KIT,
securing glove box assembly to dash
1
Screw,
self-tapping
6
Nut,
fix
6
Check Strap Assembly,
glove box lid, metal, fitted up
1
to comm. no. CC/CP75000
Check Strap Assembly,
glove box lid, plastic, fitted
1
from comm. no. CC/CP75000 up to CF/CR1
Check Strap Assembly,
glove box lid, metal, fitted
1
from comm. no. CF/CR1 up to CF12500/CR5000 approx.
Check Strap Assembly,
glove box lid, plastic, fitted
1
after comm. no. CF12500/CR5000 approx.
Screw,
securing check strap to metal fascia panel and
4
to glove box door; take great care that screws will
not run through face of glove box door or split
veneer; drill a pilot hole.
Lock,
glove box lid, silver finish, fitted up to comm.
1
no. CC/CP75000
Lock,
glove box lid, silver finish; alternative to previous
1
listing
Lock,
glove box lid, black finish, fitted after comm.
1
no. CC/CP75000
Fingerpull,
glove box lid; not used on TR6 models
1
Bracket,
striker, glove box lock
1
Screw,
securing striker bracket to metal panel
2
Bracket,
buffer, glove box lid
1
Buffer,
rubber, fitted to buffer bracket; note that this
2
may also be fitted to striker bracket with possible
advantages
Screw,
wood, securing buffer bracket to back of wood
2
dash panel
Switch,
glove box interior lamp, clipped into hole in
1
metal fascia panel
Buffer,
rubber, fitted to plunger of switch
1
Bulb,
glove box interior lamp
1
Plate No.
Part No.
Description
No. Off
VENTILATION LOUVRE DETAILS
DASH LEVEL LOUVRE DETAILS,
fitted up to comm. no.
CC/CP50000
Louvre Assembly,
`'eye-ball,'' metal
2
HARDWARE AND FITTINGS,
securing louvres to
metal fascia panel
Ring,
clamping
2
Clamp,
shovel
4
Washer,
lock
4
Nut,
knurled
4
DASH LEVEL LOUVRE DETAILS,
fitted from comm. no.
CC/CP50000 up to CF/CR1
Louvre Assembly,
`'eye-ball,'' plastic snap-in type
2
Ring,
rubber, sealing louvres to metal fascia panel
2
DASH LEVEL LOUVRE DETAILS,
fitted after comm. no
CF/CR1
Louvre Assembly,
`'eye-ball,'' plastic snap-in type
2
Ring,
rubber, sealing louvres to metal fascia panel
2
FOOT LEVEL LOUVRE DETAILS
Bracket,
louvre support, L.H.
1
Bracket,
louvre support, R.H.
1
HARDWARE,
securing louvre support brackets to
metal fascia panel
Screw,
self-tapping
4
Nut,
spire
4
Louvre Assembly,
`'eye-ball,'' metal, fitted up
2
to comm. no. CC/CP75000
Louvre Assembly,
`'eye-ball,'' plastic, fitted after
2
comm. no. CC/CP75000
HARDWARE,
clamping louvres into support brackets
Screw,
set
2
Washer,
plain
2
Washer,
lock
2
Nut,
hex
2
