TRIUMPH TR6
PLATE HJ
HIGH-PERFORMANCE COMPONENTS
SWAY BARS
HIGH-PERFORMANCE COMPONENTS--SWAY BARS
FRONT SWAY BAR KITS
Front Anti-Roll Bar Kit,
complete, stock components
1
with 11/16-inch bar
FRONT AND REAR SWAY BAR KITS
Safety Note:
Fit these bars as a matched set, as fitting
the rear bar alone with a stock front bar will induce
excessive and dangerous oversteer which could result
in an accident. Again, "balance" is the word, and
fitting matched components is the way to go.
ADDCO BRAND SWAY BARS;
inexpensive sway
bar kits that are well matched and easy to install;
for best results fit both kits; do not fit rear bar alone
Complete Front Sway Bar Kit,
with 7/8-inch bar,
1
hardware, fittings, and installation instructions
Complete Rear Sway Bar Kit,
with 3/4-inch bar,
1
hardware, fittings, and installation instructions
COMPETITION-GRADE SWAY BARS,
by Richard Good;
fully adjustable with well-designed alloy block mounts
and Rose joints; rear bar is upgrade of Kastner design
from BL competition preparation manual; fit both bars
together; do not fit rear bar alone
Front Sway Bar Kit;
competition grade, 7/8-inch
1
bar; complete kit
Rear Sway Bar Kit;
competition grade, 7/8-inch
1
bar; complete kit
REVINGTON TR SWAY BARS,
for fast road use; fit
both front and rear bars; do not fit rear bar alone
RTR3285
Front Sway Bar Kit,
7/8-inch bar, links with
1
urethane mounts
Front Sway Bar Kit,
7/8-inch bar, links with
1
Rose joints
Rear Sway Bar Kit,
5/8-inch bar; adjustable links
1
with Rose joints; fits above differential and
cannot ground out; may be fitted only with
coil-over tube shock conversions listed on page 519
Plate No.
Part No.
Description
No. Off
SWAY BAR LINKS AND BUSHES
Link Assembly,
stock component with rubber link bushes
2
Adjustable Link Kit;
includes two fully adjustable
1
links which can be used with most bars taking
standard links
Link Bush Kit;
includes heavy-duty polyurethane
1
bushes
Mounting Bush Kit,
front sway bar, heavy-duty
1
polyurethane, fits stock front sway bar
Link Kit,
anti-roll bar; required if you wish to
2
fabricate the rear anti-roll bar described on
page 26 of the competition preparation manual
UPRATED COMPONENTS FOR STOCK SWAY BARS
Mounting Kit,
front sway bar, uprated; includes
1
urethane mounts and urethane link bushes
HP??
Mounting Kit,
front sway bar, uprated; includes
1
urethane mounts and new links with urethane
mounts
FRAME MOUNTING KITS,
with hard polyurethane
bushes; each kit includes one pair of mountings
Mounting Kit,
5/8-inch sway bars
A/R
Mounting Kit,
3/4-inch sway bars
A/R
Mounting Kit,
7/8-inch sway bars
A/R
Mounting Kit,
1-inch sway bars
A/R
Plate No.
Part No.
Description
No. Off
