78
TRIUMPH TR6
PLATE CL
GEARBOX HOUSING AND TOP
COVER DETAILS
GEARBOX HOUSING AND TOP COVER DETAILS
SELECTOR SHAFT SLEEVES
Sleeve,
1st and 2nd selector shaft
1
Sleeve,
3rd and 4th selector shaft
1
Sleeve,
reverse selector shaft, earlier top covers
1
Screw,
taper, securing selectors and forks
5
SELECTOR SHAFT SEALING DETAILS
Ring,
sealing, selector shaft
3
Plate,
cover, over sealing rings
1
HARDWARE,
securing cover and rings to top cover
Screw,
set
2
Washer,
lock
2
INTERLOCK DETAILS
Plunger,
interlock, fitted in center selector shaft
1
Ball,
interlock, fitted in top cover between selector
2
shafts
DETENT DETAILS-Selector Shafts
1ST/2ND SELECTOR SHAFT,
fitted up to gearbox no.
CD23951
Ball,
detent
1
Spring,
detent
1
Plug,
screwed, retaining ball and spring
1
1ST/2ND SELECTOR SHAFT,
fitted after gearbox no.
CD23951
Ball,
detent
1
Spring,
detent
1
Plug,
screwed, retaining ball and spring, fitted
1
earlier
Plug,
pressed-in, retaining ball and spring, fitted
1
later
3RD/4TH SELECTOR SHAFT,
fitted up to gearbox no.
CD22093
Plunger,
detent
1
Spring,
detent
1
Piece,
distance
1
Plug,
screwed, retaining plunger, spring and
1
distance piece
3RD/4TH SELECTOR SHAFT,
fitted after gearbox no.
CD22093
Ball,
detent
1
Spring,
detent
1
Plug,
screwed, retaining ball and spring, fitted
1
earlier
Plug,
pressed-in, retaining ball and spring, fitted
1
later
REVERSE SELECTOR SHAFT
Plunger,
detent
1
Spring,
detent
1
Piece,
distance
1
Plug,
screwed, retaining plunger, spring, and
1
distance piece, fitted earlier
Plug,
pressed-in, retaining plunger, spring, and
1
distance piece, fitted later
Plate No.
Part No.
Description
No. Off
GEARSHIFT LEVER DETAILS
Gearshift Lever Assembly
1
Plunger,
anti-vibration, in ball end
1
Spring,
loading plunger
1
Cap,
gearshift lever, fitted up to comm. no. CF1
1
Cap,
gearshift lever, fitted after comm. no. CF1
1
Spring,
under cap, fitted up to early 1973
1
Spring,
under cap, fitted after early 1973
1
Retainer,
spring
1
HARDWARE,
securing gearshift lever cap to top cover
Screw,
set
1
Washer,
lock
1
Pin,
locating gearlever, fitted earlier
2
Pin,
locating gearlever, fitted later
2
Pin,
locating gearlever, used with overdrive steady
2
bracket
Nut,
jam, locking pins
2
Please Note:
A coating of grease between the
gearshift lever cap and the top cover will
control the corrosion caused by dissimilar
metals, which can sometimes make the
gearshift lever cap hard to remove.
Knob,
gearshift lever, U.S.A. (Black leather knob with
1
silver shift emblem.)
Knob,
gearshift lever, all markets except U.S.A. fitted up
1
to commission no. CP53853
Knob,
gearshift lever, all markets except U.S.A., fitted
1
after commission no. CP53853
Nut,
jam, securing knob
1
Nut,
jam, securing knob, apparently an alternative to
1
GASKET AND HARDWARE,
securing top cover to gearbox
housing
Gasket
1
Bolt,
2 7/8-inches long
2
Bolt,
2 3/4-inches long
2
Screw,
set
4
Washer,
lock
8
HARDWARE,
securing gearbox assembly to engine
Bolt
8
Stud
3
Washer,
lock
11
Nut
11
Bolt,
dowel
2
Washer,
lock
2
Nut
2
GEARBOX GASKET SET,
comprising:
1
Front Cover Gasket
1
Countershaft Cover Plate Gasket
1
Top Cover Gasket
1
Rear Extension Gasket
1
Gasket
between A-type overdrive unit and adaptor plate
1
Gasket,
between J-type overdrive unit and adaptor
1
housing
REAR ENGINE (GEARBOX) MOUNTING DETAILS
(See Section AG.)
Plate No.
Part No.
Description
No. Off
