TRIUMPH TR6
PLATE AS
EVAPORATIVE LOSS CONTROL SYSTEM
1972 UP TO 1976, U.S.A. MODELS
20
EVAPORATIVE LOSS CONTROL SYSTEMS, 1972 UP TO 1976, U.S.A.
EVAPORATIVE LOSS CONTROL SYSTEMS,
fitted after comm.
no. CC75000 approx.
Please Note:
Although only the latest layout is
illustrated, this section actually lists the components
for three slightly different evaporative loss control
systems, that fitted to 1972 models, that fitted to
1973 models, that fitted to 1974-1976 models. The
1972 model year was chosen as the beginning
point for this section because it was then that the
``emission tank'' mounted on the inside of the R.H.
rear quarter was discontinued and then that the
``separator canister'' mounted on top of the fuel
tank first appeared. The layouts used in the 1972
and 1973 model years vary from the illustrated
layout in that the nylon pipe connected to the
separator canister makes a loop around the trunk
similar to the illustration for the previous section
before passing through the trunk floor to splice with
the pipe going forward along the chassis frame. In
addition, the anti run-on valve did not appear until
the 1973 model year. Components for these
variations and other minor ones are listed in this
section, although they are not illustrated.
Canister,
separator
1
Clip,
canister
1
HARDWARE,
securing canister clip, fitted up to
comm. no. CF1 approx.
Screw,
set
1
WPP5
Washer,
plain
1
Washer,
lock
1
Nut
1
HARDWARE,
securing canister clip, fitted after
comm. no. CF1 approx.
Screw,
self-tapping
1
Washer,
plain
1
Nut,
fix
1
CONNECTORS,
separator canister to fuel tank fitting
Connector,
fitted up to comm. no.
1
CF12500
Connector,
fitted after comm. no.CF12500
1
CONNECTORS,
separator canister to pipe
Connector,
fitted up to comm. no. CF1 approx.
1
Connector,
fitted from comm. no. CF1 up to
1
CF12500
Connector,
5-inch length, fitted after comm. no.
1
CF12500
Plate No.
Part No.
Description
No. Off
EVAPORATIVE LOSS CONTROL SYSTEMS--
Continued
PIPES,
from separator canister through trunk floor
Pipe,
nylon, rear, fitted up to comm. no. CF1 (Makes
1
loop around trunk before passing through trunk
floor similar to illustration for previous section.)
Pipe,
nylon, rear, fitted from comm. no. CF1 up to
1
CF12500 (Makes loop around trunk before
passing through trunk floor similar to illustration
for previous section.)
Pipe,
nylon, rear, fitted after comm. no. CF12500 (As
1
illustrated.)
Grommet,
rubber, sealing hole in trunk floor around
1
pipe, fitted earlier (?)
Grommet,
rubber, sealing hole in trunk floor around
1
pipe, fitted later (?)
CONNECTORS,
rear nylon pipe to intermediate pipe
Connector,
rear, fitted up to comm. no. CF12500
1
Connector,
rear, fitted after comm. no. CF12500
1
PIPES,
from rear connector to front connector
Pipe,
nylon, intermediate, fitted up to comm. no.
1
CF1
Pipe,
nylon, intermediate, fitted from comm. no. CF1
1
up to CF12500
PIPE ASSEMBLY,
intermediate, fitted after comm. no.
CF12500
Pipe,
steel, from rear connector to intermediate
1
connector
Pipe,
nylon, 58-inch length, from intermediate
1
connector to front connector
Connector,
intermediate
1
Restrictor
1
CONNECTORS,
intermediate pipes to restrictor
Connector,
front, fitted up to comm. no. CF12500
1
Connector,
front, fitted after comm. no. CF12500
1
CONNECTORS,
restrictor to carbon canister
Connector,
fitted up to comm. no. CF12500
1
Connector,
fitted after comm. no. CF12500
1
(Continued on next page.)
Plate No.
Part No.
Description
No. Off
