TRIUMPH TR6
PLATE AM
ENGINE LUBRICATION
15
ENGINE LUBRICATION
OIL PUMPS
Please Note:
Neither of the pumps listed below is the
one with the cast iron pickup cited by Kastner as
being unsuitable for racing.
OIL PUMP ASSEMBLY,
carb models up to eng. no.
1
CC66296 and P.I. models up to CP53748
Body,
oil pump
1
Plug,
core, oil pump body
1
Rotor and Shaft Assembly
1
Cover,
oil pump body
1
Filter,
oil pump
1
HARDWARE,
securing oil pump to engine block
Bolt
2
Bolt
1
Washer,
lock
1
OIL PUMP ASSEMBLY,
carb models after eng. no.
1
CC66296 and P.I. models after CP53748
Body,
oil pump
1
Rotor and Shaft Assembly
1
Cover,
oil pump body
1
Filter and Suction Pipe Assembly
1
Nut,
locking suction pipe to oil pump body
1
HARDWARE,
securing oil pump to engine block
Bolt
3
Washer,
lock
3
OIL PRESSURE RELIEF DETAILS
Oil Pressure Relief Valve Kit;
includes body, piston
1
stock grade spring, and seal
Piston,
oil pressure relief valve
1
Spring,
oil pressure relief valve
1
Plug (Body),
oil pressure relief valve
1
Seal
, plug to engine block
1
OIL PRESSURE FAILURE SENDING SWITCH
Sending Unit,
one plug, all P.I. models
1
Sending Unit,
one plug, carb models, fitted up to eng.
1
no. CF1
Sending Unit,
three plugs, carb models, fitted after
1
eng. no. CF1
OIL PRESSURE GAUGE DETAILS
Gauge,
oil pressure, fitted up to comm. no. CF/CR1
1
Gauge,
oil pressure, fitted after comm. no. CF/CR1
1
Washer,
leather, sealing connection between gauge
1
and oil pipe
Pipe,
between oil pressure gauge and engine block,
1
carb models only
Pipe,
between oil pressure gauge and engine block,
1
Plate No.
Part No.
Description
No. Off
P.I. models only
Adaptor,
pipe to engine block, carb models only
1
OIL FILTER DETAILS
OIL FILTER ASSEMBLY (Full Flow)
SHELL ASSEMBLY
Bolt,
center
1
Washer,
rubber, sealing bolt head
1
Spring,
retaining element
1
Valve Assembly
1
Centralizer,
filter element
1
ELEMENT,
oil filter
1
Ring,
rubber, sealing
1
SPIN-ON OIL FILTER ADAPTORS
Adaptor,
spin-on oil filter
1
Oil Filter Assembly,
spin-on
1
OIL COOLER COMPONENTS
Radiator Assembly,
oil cooler, thirteen rows
1
HARDWARE,
securing oil cooler radiator to radiator
protection shield
Screw,
set
4
Washer,
lock
4
Nut
4
Note: TR6 radiator shields are pre-drilled for oil cooler
installation.
Fitting Kit,
oil cooler (Spin-on adaptor and rubber
1
hoses.)
Fitting Kit,
oil cooler (Spin-on adaptor and braided
1
metal hoses.)
Oil Filter Assembly,
spin-on
1
HARDWARE AND FITTINGS,
securing hoses to L.H. front
engine mounting bracket and to L.H. radiator
support stay
``W'' Clip
2
Screw,
set
2
Washer,
lock
2
Nut
2
Thermostatic Switch,
for use in cold conditions to allow
1
the oil to warm up to normal operating
temperatures
Plate No.
Part No.
Description
No. Off
