10
PLATE AH
STATIONARY ENGINE COMPONENTS
TRIUMPH TR6
STATIONARY ENGINE COMPONENTS
FRONT ENGINE PLATE DETAILS
Front Engine Plate,
P.I. models
1
Front Engine Plate,
carb models up to comm. no.
1
CF35000
Front Engine Plate,
carb models after comm. no.
1
CF35000
Gasket,
between front engine plate and engine block
1
HARDWARE,
securing front engine plate to engine
block
Screw,
set
3
Washer,
lock
3
HARDWARE,
securing front engine plate and
camshaft locating plate to engine block
Screw,
set
2
Washer,
lock
2
HARDWARE,
securing front engine plate and timing
cover to engine block
Stud
2
Washer,
lock
2
Nut
2
Screw,
set
5
Washer,
lock
5
HARDWARE,
securing front engine plate to front sealing block
Screw,
set
2
Washer,
lock
2
OIL PUMP DETAILS
OIL PUMP ASSEMBLY,
fitted up to engine no. CC66296
1
Body Assembly
1
Plug,
core, oil pump body
1
Rotor and Spindle Assembly
1
Cover,
oil pump body
1
Filter,
oil pump
1
Bolt
2
Bolt
1
Washer,
lock
3
OIL PUMP ASSEMBLY,
fitted after engine no. CC66296
1
Body Assembly
1
Rotor and Spindle Assembly
1
Cover,
oil pump body
1
Strainer Assembly
1
Nut,
locking strainer pipe to cover
1
Bolt
3
Washer,
lock
3
OIL PRESSURE RELIEF DETAILS
Piston,
relief valve
1
Spring
1
Plug
1
Seal,
plug
1
Plate No.
Part No.
Description
No. Off
OIL PRESSURE SWITCHES
Switch,
oil pressure, one plug connection, fitted to all
1
P.I. models
Switch,
oil pressure, one plug connection, fitted to carb
1
models up to engine no. CF1 UE
Switch,
oil pressure, three plug connections, fitted to
1
carb models after engine no. CF1 UE
OIL SUMP DETAILS
Oil Sump Assembly,
fitted up to comm. no.
1
CF12500/CR5000
Oil Sump Assembly,
fitted after comm. no.
1
CF12500/CR5000
Plug,
oil drain
1
Plug,
oil drain; alternative to 114774
1
Gasket,
oil sump
1
HARDWARE,
securing oil sump to engine block
Screw,
set
23
Washer,
lock
23
OIL DIPSTICK DETAILS
Tube,
dipstick
1
DIPSTICK ASSEMBLY
1
Washer,
felt, sealing dipstick
1
WATER DRAIN DETAILS
WATER DRAIN DETAILS,
earlier fitment
Tap,
water drain
1
Washer,
fibre
A/R
Washer,
fibre
A/R
WATER DRAIN DETAILS,
later fitment
Plug,
water drain
1
Washer,
fibre
1
ENGINE LIFTING DETAILS
Eye,
lifting, front, carb models
1
Eye,
lifting, front, P.I. models, up to comm. no. CR12500
1
Eye,
lifting, front, P.I. models, after comm. no. CF12500
1
HARDWARE,
securing front lifting eye to engine block
Screw,
set
2
Washer,
lock
2
Eye,
lifting, rear
1
Please Note: On carb models after comm. no. CF35000,
a
diverter valve bracket was fitted along with the rear lifting
eye apparently. This bracket is listed in Section BJ. On
the very latest carb models, the rear lifting eye and diverter
valve bracket were combined into one part; however, no
part no. is available for this component.
HARDWARE,
securing rear lifting eye to engine block
Screw,
set, fitted up to comm. no. CF35000
2
Screw,
set, fitted after comm. no. CF35000 to cars with
2
double brackets
Screw,
set, fitted after comm. no. CF35000 to cars with
2
single brackets
Washer,
lock
2
Plate No.
Part No.
Description
No. Off
