100
TRIUMPH TR6
PLATE DA
DIFFERENTIAL DETAILS--LATER UNIT
DIFFERENTIAL DETAILS--LATER UNIT
REAR AXLE COMPONENTS-
Continued
INNER AXLE SHAFT DETAILS
Inner Axle Shaft,
L.H.
1
Inner Axle Shaft,
R.H.
1
Bearing,
inner axle shaft
2
Housing,
oil seal, inner axle shaft
2
Seal,
oil, inner axle shaft
2
HARDWARE,
securing oil seal housing to axle
housing
Screw,
set
8
Washer,
lock
8
FLANGE ASSEMBLY,
driving, inner
2
Stoneguard,
welded to flange
2
HARDWARE,
securing driving flanges to inner axle
shafts
Key
2
Washer,
plain
2
Nut,
nyloc
2
INNER AXLE SHAFT DETAILS,
alternative fitment,
may have been utilized after mid-1975 (Identical
to arrangement listed above except for cotter
pin holes in inner axle shafts and use of
castellated nuts with cotter pins.)
Inner Axle Shaft,
L.H.
1
Inner Axle Shaft,
R.H.
1
HARDWARE,
securing driving flanges to inner axle
shafts
Key
2
Washer,
plain
2
Nut,
castellated
2
Pin,
cotter
2
REAR COVER AND MOUNTING BRACKET ASSEMBLY
1
Rear Cover and Mounting Bracket Casting,
fitted
1
up to comm. no. CF12500/CR5000 approx.
Rear Cover and Mounting Bracket Casting,
fitted
1
after comm. no. CF12500/CR5000 approx.
Plug,
core, fitted in breather hole
1
Pin,
cotter
1
Please Note:
Although the rear cover casting
design was changed at comm. no.
CF12500/CR5000 approx., it does not appear
that the part no. of the Rear Cover Assembly
was changed, and it is certainly possible that
the change was made in production only and
never supplied as a spare part.
Gasket,
between rear cover and axle housing (Also
1
coat gasket on both sides with Wellseal gasket
cement.)
Plate No.
Part No.
Description
No. Off
REAR AXLE COMPONENTS-Continued
HARDWARE,
securing rear cover to axle housing
Dowel,
locating cover
2
Screw,
set
8
Washer,
lock
8
FRONT AXLE MOUNTING PLATE ASSEMBLY
1
Washer,
distance, welded to plate
1
HARDWARE,
securing front mounting plate to axle
housing
Bolt,
special (Don't substitute.)
4
Washer,
shakeproof
4
MOUNTING DETAILS,
rear axle center assembly to
chassis frame
Bolt,
mounting, axle center, front, welded to chassis
2
frame
Mounting,
rubber, front, upper
2
Mounting,
rubber, front, lower
2
HARDWARE,
securing front mountings and differential to
chassis frame
Washer,
special, large
2
Nut,
nyloc
2
Bolt,
mounting, axle center, rear, welded to chassis
2
frame
Mounting Assembly,
axle center, rear
2
HARDWARE,
securing mounting assembly to rear cover
and mounting bracket assembly
Bolt
4
Washer,
plain
4
Nut,
nyloc
4
HARDWARE,
securing rear mountings and differential to
chassis frame
Washer,
special
2
Nut,
nyloc
2
Plate No.
Part No.
Description
No. Off
