98
TRIUMPH TR6
PLATE CZ
DIFFERENTIAL DETAILS--EARLY UNIT
DIFFERENTIAL DETAILS-EARLY UNIT
REAR AXLE COMPONENTS-
Continued
SHIMS,
adjusting pre-load on pinion shank bearing
Shim,
.003 inch thickness
A/R
Shim,
.005 inch thickness
A/R
Shim,
.010 inch thickness
A/R
Oil Seal Assembly,
front of casing
1
Flange,
pinion
1
Please Note:
The front mounting bracket must be installed
before the pinion flange is finally secured.
HARDWARE,
securing pinion flange onto pinion shaft
Washer,
plain
1
Nut,
slotted
1
Wire,
locking, soft iron, 14 swg. x 4 inches long
1
INNER AXLE SHAFT DETAILS
Inner Axle Shaft,
L.H.
1
Inner Axle Shaft,
R.H.
1
Bearing,
inner axle shaft
2
Housing,
oil seal, inner axle shaft
2
Seal,
oil, inner axle shaft
2
HARDWARE,
securing oil seal housing to axle
housing
Screw,
set
8
Washer,
lock
8
FLANGE ASSEMBLY,
driving, inner
2
Stoneguard,
welded to flange
2
HARDWARE,
securing driving flanges to inner axle
shafts
Key
2
Washer,
plain
2
Nut,
nyloc
2
REAR COVER AND MOUNTING BRACKET
1
Plug,
core, fitted in breather hole
1
Pin,
cotter, breather
1
Gasket,
between rear cover and axle housing (Also
1
coat gasket on both sides with Wellseal gasket
cement.)
HARDWARE,
securing rear cover to axle housing
Dowel,
locating cover
2
Screw,
set
8
Washer,
lock
8
FRONT AXLE MOUNTING PLATE ASSEMBLY
1
Washer,
distance, welded to plate
1
Plate No.
Part No.
Description
No. Off
REAR AXLE COMPONENTS-
Continued
HARDWARE,
securing front mounting plate to axle
housing
Bolt,
special (Don't substitute.)
4
Washer,
shakeproof
4
MOUNTING DETAILS,
rear axle center assembly to
chassis frame
Bolt,
mounting, axle center, front, welded to chassis
2
frame
Mounting,
rubber, front, upper
2
Mounting,
rubber, front, lower
2
HARDWARE,
securing front mountings and differential to
chassis frame
Washer,
special, large
2
Nut,
nyloc
2
Bolt,
mounting, axle center, rear, welded to chassis
2
frame
Mounting Assembly,
axle center, rear
2
HARDWARE,
securing mounting assembly to axle cover
and mounting bracket assembly
Bolt
4
Washer,
plain
4
Nut,
nyloc
4
HARDWARE,
securing rear mountings and differential to
chassis frame
Washer,
special
2
Nut,
nyloc
2
Plate No.
Part No.
Description
No. Off
