TR250 and TR6 Companion
69
Part No.
Description
No. Off
List Price
Your Price
BEARING KIT,
rear hub, Timken bearings,
2
139.64
high-quality seals, collapsible spacer,
cotter pin; fits all TR250, TR6
Bearing,
inner, Timken brand
2
29.15
Bearing,
outer, Timken brand
2
76.14
Seal,
inner, Chicago Rawhide brand
2
35.50
Seal,
outer
2
4.80
Spacer,
bearing, collapsible
2
6.29
Pin,
cotter
2
.32
WHEEL BEARING GREASE
Castrol Wheel Bearing Grease,
A/R
NLS
28 oz. resealable tub
REAR HUB BEARINGS—TIMKEN BRAND, TR250, TR6
"Rear Hubs Are Safety Critical and Require Careful Work During
Rebuilding"
You can rebuild your own hubs, but the work requires great attention to detail.
Begin by reading everything you can on the subject. The final bearing clearance is
critical, and you want to aim for almost no movement as long as the hub continues to
roll smoothly. Too much play at the hub makes a lot of play on the wheel rims.
Never reuse a collapsible spacer once it has been collapsed. If you think you have made a
mistake during assembly, disassemble and start over again with a new spacer. Your
safety and the safety of your passengers depends on this job being done well.
DRIVE TRAIN