The Roadster FactoryThe Roadster Factory
TR6 Master Catalogue—Vol. 1 (Blue)
Table of Contents
LOGIN | VIEW CART | CHECKOUT
View Shopping Cart -
Search
                        10   < Previous Next >   10    
78
TRIUMPH TR6
PLATE CL
GEARBOX HOUSING AND TOP
COVER DETAILS
GEARBOX HOUSING AND TOP COVER DETAILS
SELECTOR SHAFT SLEEVES
CL41
Sleeve,
1st and 2nd selector shaft
1
CL42
Sleeve,
3rd and 4th selector shaft
1
CL43
Sleeve,
reverse selector shaft, earlier top covers
1
CL44
Screw,
taper, securing selectors and forks
5
SELECTOR SHAFT SEALING DETAILS
CL45
Ring,
sealing, selector shaft
3
CL46
Plate,
cover, over sealing rings
1
HARDWARE,
securing cover and rings to top cover
CL47
Screw,
set
2
CL48
Washer,
lock
2
INTERLOCK DETAILS
CL49
Plunger,
interlock, fitted in center selector shaft
1
CL50
Ball,
interlock, fitted in top cover between selector
2
shafts
DETENT DETAILS-Selector Shafts
1ST/2ND SELECTOR SHAFT,
fitted up to gearbox no.
CD23951
CL51
Ball,
detent
1
CL52
Spring,
detent
1
CL53
Plug,
screwed, retaining ball and spring
1
1ST/2ND SELECTOR SHAFT,
fitted after gearbox no.
CD23951
Ball,
detent
1
Spring,
detent
1
Plug,
screwed, retaining ball and spring, fitted
1
earlier
Plug,
pressed-in, retaining ball and spring, fitted
1
later
3RD/4TH SELECTOR SHAFT,
fitted up to gearbox no.
CD22093
CL54
Plunger,
detent
1
CL55
Spring,
detent
1
CL56
Piece,
distance
1
CL57
Plug,
screwed, retaining plunger, spring and
1
distance piece
3RD/4TH SELECTOR SHAFT,
fitted after gearbox no.
CD22093
Ball,
detent
1
Spring,
detent
1
Plug,
screwed, retaining ball and spring, fitted
1
earlier
Plug,
pressed-in, retaining ball and spring, fitted
1
later
REVERSE SELECTOR SHAFT
CL58
Plunger,
detent
1
CL59
Spring,
detent
1
CL60
Piece,
distance
1
CL61
Plug,
screwed, retaining plunger, spring, and
1
distance piece, fitted earlier
CL62
Plug,
pressed-in, retaining plunger, spring, and
1
distance piece, fitted later
Plate No.
Part No.
Description
No. Off
GEARSHIFT LEVER DETAILS
CL63
Gearshift Lever Assembly
1
CL64
Plunger,
anti-vibration, in ball end
1
CL65
Spring,
loading plunger
1
CL66
Cap,
gearshift lever, fitted up to comm. no. CF1
1
Cap,
gearshift lever, fitted after comm. no. CF1
1
CL67
Spring,
under cap, fitted up to early 1973
1
Spring,
under cap, fitted after early 1973
1
CL68
Retainer,
spring
1
HARDWARE,
securing gearshift lever cap to top cover
CL69
Screw,
set
1
CL70
Washer,
lock
1
CL71
Pin,
locating gearlever, fitted earlier
2
Pin,
locating gearlever, fitted later
2
Pin,
locating gearlever, used with overdrive steady
2
bracket
CL72
Nut,
jam, locking pins
2
Please Note:
A coating of grease between the
gearshift lever cap and the top cover will
control the corrosion caused by dissimilar
metals, which can sometimes make the
gearshift lever cap hard to remove.
CL73
Knob,
gearshift lever, U.S.A. (Black leather knob with
1
silver shift emblem.)
Knob,
gearshift lever, all markets except U.S.A. fitted up
1
to commission no. CP53853
Knob,
gearshift lever, all markets except U.S.A., fitted
1
after commission no. CP53853
CL74
Nut,
jam, securing knob
1
Nut,
jam, securing knob, apparently an alternative to
1
GASKET AND HARDWARE,
securing top cover to gearbox
housing
CL75
Gasket
1
CL76
Bolt,
2 7/8-inches long
2
CL77
Bolt,
2 3/4-inches long
2
CL78
Screw,
set
4
CL79
Washer,
lock
8
HARDWARE,
securing gearbox assembly to engine
CL80
Bolt
8
CL81
Stud
3
CL82
Washer,
lock
11
CL83
Nut
11
CL84
Bolt,
dowel
2
CL85
Washer,
lock
2
CL86
Nut
2
GEARBOX GASKET SET,
comprising:
1
Front Cover Gasket
1
Countershaft Cover Plate Gasket
1
Top Cover Gasket
1
Rear Extension Gasket
1
Gasket
between A-type overdrive unit and adaptor plate
1
Gasket,
between J-type overdrive unit and adaptor
1
housing
REAR ENGINE (GEARBOX) MOUNTING DETAILS
(See Section AG.)
Plate No.
Part No.
Description
No. Off











                      10   < Previous | | | | | | Next >   10    

This Zenscript catalog conversion was performed by zeni.net internet services. If you have questions about this interface, contact support@zeni.net. Cookies and Javascript must be enabled for online ordering, but these pages should render in a viewable manner in any style-sheet capable browser.