The Roadster FactoryThe Roadster Factory
TR6 Master Catalogue—Vol. 1 (Blue)
Table of Contents
LOGIN | VIEW CART | CHECKOUT
View Shopping Cart -
Search
                        10   < Previous Next >   10    
TRIUMPH TR6
PLATE AD
ENGINE TUNE-UP COMPONENTS
5
ENGINE TUNE UP COMPONENTS
ENGINE TUNE-UP COMPONENTS
ELECTRICAL TUNE-UP COMPONENTS
AD1
Spark Plug,
Champion N9Y
6
Spark Plug,
Champion N12Y, for use whenever a hotter
6
plug is required
AD2
Spark Plug,
NGK brand, for stock engines
6
AD3
Contact Set (Points Set),
Lucas brand
1
AD4
Condenser,
Lucas brand
1
AD5
Distributor Cap,
Lucas brand
1
AD6
Rotor Arm,
Lucas brand
1
AD7
Ignition Coil,
stock type, up to comm. no. CF1, Lucas
1
brand
Ignition Coil,
stock type, after comm. no. CF1, Lucas
1
brand
AD8
Ignition Coil,
Lucas high performance``sports'' coil;
1
fits all TR6
AD9
Ignition Wire Set,
OEM green wires, early TR6
1
Ignition Wire Set,
OEM green wires, later TR6 with right
1
angle connections on ends of wires plugging into
distributor cap
CARBURETTOR REPAIR KITS AND TUNING AIDS
AD10
Kit,
carburettor repair, major
2
AD11
Tool,
carburettor jet adjusting
1
AD12
Meter,
air flow, Unisyn, for synchronizing multiple carbs
1
(also P.I. throttles)
AD13
Colortune Kit,
allows mixture setting by watching colour
1
of combustion inside engine
FILTERS
AD14
Oil Filter,
both carb and P.I. models
1
SPIN-ON OIL FILTER CONVERSION,
both carb and P.I.
models
AD15
Spin-On Oil Filter Adaptor
1
AD16
Spin-On Oil Filter
1
AD17
Air Filter,
carb models only
2
AD18
Gasket,
between air filter canister and carburettors,
2
carb models only
AD19
Air Filter,
P.I. models only
1
AD20
Fuel Filter,
carb models only
1
AD21
Fuel Filter,
P.I. models only
1
COOLING SYSTEM
AD22
Thermostat,
winter, opening at 190 degrees Fahrenheit
1
(88 degrees Centigrade)
Thermostat,
summer, opening at 180 degrees
1
Fahrenheit (82 degrees Centigrade)
AD23
Gasket,
thermostat cover
1
AD24
Radiator Cap,
7 lb. pressure, fitted up to commission
1
no. CF12500/CR5000
Plate No.
Part No.
Description
No. Off
COOLING SYSTEM--Continued
Radiator Cap,
13 lb. pressure, fitted after commission
1
no. CF12500/CR5000
AD25
Fan Belt,
3/8 inch width, all models except U.S.A.
1
Fan Belt,
3/8 inch width, early U.S.A. carb models
1
Fan Belt,
1/2 inch width, later U.S.A. models
1
TKKC2165
Fan Belt,
1/2 inch width, later U.S.A. models after
1
engine number CF35000 (Cars with air pumps.)
Fan Belt,
air pump drive, later U.S.A. models after
1
engine no. CF35000
AD26
Water Pump and Pulley Assembly,
with 3/8 inch pulley
1
groove, all P.I. models
Water Pump and Pulley Assembly,
with 3/8 inch pulley
1
groove, early carb models
Water Pump and Pulley Assembly,
with 1/2 inch pulley
1
groove, later U.S.A. models up to eng. no. CF35000
Water Pump and Pulley Assembly,
with 1/2 inch pulley
1
groove, latest carb models after eng. no. CF35,000
(Cars with air pumps.)
Please Note:
When replacing fan belts or water
pumps, insure that crankshaft pulley, water pump
pulley, and alternator pulley all have the same
width, and then choose the corresponding
replacements.
FUEL PUMPS
AD27
FUEL PUMP,
original equipment, AC brand
1
Repair Kit,
original fuel pump only
1
AD28
Fuel Pump,
aftermarket replacement
1
Plate No.
Part No.
Description
No. Off










                      10   < Previous | | | | | | Next >   10    

This Zenscript catalog conversion was performed by zeni.net internet services. If you have questions about this interface, contact support@zeni.net. Cookies and Javascript must be enabled for online ordering, but these pages should render in a viewable manner in any style-sheet capable browser.